Knoppix Forum | www.KnoppixForum.de

Hallo,

habe mal wieder kleines Problem, seit heute funktioniert mein USB-Anschluß (1.1) nicht mehr richtig. Bisher konnte ich verschiedene Sticks anschließen und auch ins System einbinden. Wenn ich jetzt einen Stick anschließe, leuchtet zwar die Lampe im Stick, aber er taucht nicht als Laufwerk unter home auf. Beim letzten Mal, als ich den Stick angeschlossen habe, hat es so komisch "geknackst", hoffentlich habe ich keinen Kurzschluß verursacht?

Habt ihr ein Tipp, was ich machen kann? (habe ein P2 Notebook IBM 570, 333 Mhz, 192Ram, Knoppix 6.0.1 HD installiert)

Gruß Thinky7

Heute Nacht hatte ich den Stick noch mal zum laufen gebracht, aber jetzt wieder kein Erkennen möglich. Lämpchen leuchtet. Ich habe zwei USB, einen am Port-Replikator, dieser funktioniert.

Hier das Erbebnis nach "dmesg " :

[ 4.792605] Using IPI No-Shortcut mode
[ 4.795427] rtc_cmos 00:03: setting system clock to 2009-10-02 09:39:34 UTC (1254476374)
[ 4.805482] Marking TSC unstable due to TSC halts in idle
[ 4.943466] hub 1-0:1.0: over-current change on port 2
[ 4.970068] Clocksource tsc unstable (delta = -154215241 ns)
[ 5.153438] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 5.330174] usb 1-2: configuration #1 chosen from 1 choice
[ 5.348765] input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input5
[ 5.351401] generic-usb 0003:045E:007D.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:06.2-2/input0
[ 5.352856] usb 1-2: New USB device found, idVendor=045e, idProduct=007d
[ 5.352877] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.352895] usb 1-2: Product: Microsoft Notebook/Mobile Optical Mouse 2.0
[ 5.352912] usb 1-2: Manufacturer: Microsoft
[ 5.652446] IBM TrackPoint firmware: 0x0b, buttons: 3/3
[ 5.686064] input: TPPS/2 IBM TrackPoint as /class/input/input6
[ 5.749990] ReiserFS: hda2: found reiserfs format "3.6" with standard journal
[ 5.750079] ReiserFS: hda2: using ordered data mode
[ 5.759738] ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.768312] ReiserFS: hda2: checking transaction log (hda2)
[ 5.839021] ReiserFS: hda2: Using r5 hash to sort names
[ 5.879992] VFS: Mounted root (reiserfs filesystem).
[ 5.883073] Freeing unused kernel memory: 428k freed
[ 16.060711] yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:0130]
[ 16.060760] yenta_cardbus 0000:00:02.0: Using INTVAL to route CSC interrupts to PCI
[ 16.060778] yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI
[ 16.060800] yenta_cardbus 0000:00:02.0: TI: mfunc 0x00001000, devctl 0x66
[ 16.291180] yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x04b8, PCI irq 11
[ 16.291203] yenta_cardbus 0000:00:02.0: Socket status: 30000006
[ 16.294262] yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:0130]
[ 16.294316] yenta_cardbus 0000:00:02.1: Using INTVAL to route CSC interrupts to PCI
[ 16.294334] yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI
[ 16.294357] yenta_cardbus 0000:00:02.1: TI: mfunc 0x00001000, devctl 0x66
[ 16.524498] yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x04b8, PCI irq 11
[ 16.524521] yenta_cardbus 0000:00:02.1: Socket status: 30000020
[ 16.539918] piix4_smbus 0000:00:06.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
[ 16.539966] piix4_smbus: probe of 0000:00:06.3 failed with error -1
[ 17.046844] Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 17.190140] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
[ 17.190235] pci 0000:06:00.0: reg 10 io port: [0x00-0x7f]
[ 17.190262] pci 0000:06:00.0: reg 14 32bit mmio: [0x000000-0x0007ff]
[ 17.190288] pci 0000:06:00.0: reg 18 32bit mmio: [0x000000-0x0007ff]
[ 17.190340] pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x003fff]
[ 17.190381] pci 0000:06:00.0: supports D1 D2
[ 17.190396] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 17.190417] pci 0000:06:00.0: PME# disabled
[ 17.190498] pci 0000:06:00.1: reg 10 io port: [0x00-0x07]
[ 17.190525] pci 0000:06:00.1: reg 14 32bit mmio: [0x000000-0x0007ff]
[ 17.190551] pci 0000:06:00.1: reg 18 32bit mmio: [0x000000-0x0007ff]
[ 17.190603] pci 0000:06:00.1: reg 30 32bit mmio: [0x000000-0x003fff]
[ 17.190634] pci 0000:06:00.1: supports D1 D2
[ 17.190649] pci 0000:06:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 17.190669] pci 0000:06:00.1: PME# disabled
[ 17.278818] gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1491kHz
[ 18.346657] xircom_cb 0000:06:00.0: enabling device (0000 -> 0003)
[ 18.346978] xircom_cb 0000:06:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 18.347012] xircom_cb 0000:06:00.0: setting latency timer to 64
[ 18.349058] eth0: Xircom cardbus revision 3 at irq 11
[ 18.509020] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 18.730921] serial 0000:06:00.1: enabling device (0000 -> 0003)
[ 18.730974] serial 0000:06:00.1: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 18.834722] 0000:06:00.1: ttyS0 at I/O 0x2480 (irq = 11) is a 16550A
[ 31.602025] Floppy drive(s): fd0 is 1.44M
[ 31.617460] FDC 0 is a National Semiconductor PC87306
[ 35.320650] serial 00:09: activated
[ 35.350365] 00:09: ttyS1 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.394117] NET: Registered protocol family 23
[ 37.743851] parport_pc 00:0b: reported by Plug and Play ACPI
[ 37.743936] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 38.373995] nsc-ircc 00:0a: activated
[ 38.374152] nsc-ircc, chip->init
[ 38.374168] nsc-ircc, Found chip at base=0x02e
[ 38.374213] nsc-ircc, driver loaded (Dag Brattli)
[ 38.376346] IrDA: Registered device irda0
[ 38.376365] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 49.467117] Adding 1048812k swap on /dev/hda1. Priority:-1 extents:1 across:1048812k
[ 50.872814] lp0: using parport0 (interrupt-driven).
[ 50.872835] lp0: console ready
[ 51.251434] ppdev: user-space parallel port driver
[ 53.562013] NET: Registered protocol family 10
[ 53.566273] lo: Disabled Privacy Extensions
[ 54.331587] xircom cardbus adaptor found, registering as eth0, using irq 11
[ 54.331686] xircom_cb: Link status has changed
[ 54.331704] xircom_cb: Link is 100 mbit
[ 64.920058] eth0: no IPv6 routers present
knoppix@Microknoppix:~$

Irgendwie habe ich aus den Zeilen herausgelesen, das die Power zu gering ist. Kann das sein?

Gruß Thinky7