23.09.2018, 15:13 UTC+2

Sie sind nicht angemeldet.

  • Anmelden
  • Registrieren

Lieber Besucher, herzlich willkommen bei: Knoppix Forum | www.KnoppixForum.de. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

Anonymous

unregistriert

1

06.01.2007, 11:08

Dateisystem wieder herstellen mit Knoppix ??

Hallo zusammen, Ihr seit meine letzte Hoffnung. Seit tagen such ich im web nach ner M?glichkeit, aber es ist bisher alles gescheitert.

Mein Rechner (Laptop) kann nicht mehr booten. Die Festplatte hat 3 Partitionen [P]:

1. P : win2000
2. P : Daten
3. P : win XP

Alle haben (bzw. hatten) NTFS als Dateisystem. Auf den ersten beiden P ist kein Dateisystem mehr angezeigt, nur auf der 3. P scheint es noch intakt zu sein. Aber in XP komm ich auch nicht mehr, weil der Rechner nicht bootet. Meine letzte Rettung ist Knoppix (in der Version Games-Knoppix 5.1), welches ich von DVD booten kann.

Beim Zugriff auf die beiden P (hda1 und hda5) bekomme ich folgende Fehlermeldung : "Couldn't mount device '/dev/hda1': Eingabe-/Ausgabefehler
Mount failed."

Unter GParted wird die Platte mit allen P angezeigt, und hda1 hat da sogar NTFS als Dateisystem, aber ich hab keinen Zugriff.

WER WEISS RAT. Gibt es vielleicht recovery tools unter Linux, die ich auf dem System ausf?hren k?nnte ??

Vielen Dank im Vorraus
Michl

RalfonLinux

Erleuchteter

Beiträge: 2 934

Geschlecht: Männlich

2

06.01.2007, 12:54

Hallo eli,

?ffne doch bitte mal eine shell (unten, der kleine Computer) und gibt folgendes ein:
[code:1]
fdisk -l
cat /etc/fstab
dd if=/dev/hda bs=512 count=1 | hexdump -C
[/code:1]
Die Ausgabe kannst du mit der Maus markieren, und hier dann ver?ffentlichen.
Interessant w?re auch der Inhalt von dmesg, das m??te aber zz (ziemlich z?gig) passieren.
Daf?r gehst du wieder in die shell und gibst ein [code:1]
dmesg #Die letzte Zeile merkst du dir
mkdir /tmp/test
mount /dev/hda1 /tmp/test
dmesg [/code:1]
Die Ausgabe von dmesg ist jetzt l?nger. Wichtig sind die Zeilen seit der letzten von dir gemerkten Zeile.
Je l?nger du f?r den zweiten dmesg brauchst, desto mehr Zeilen stehen drin, daher zz
Weiterhin die Ausgabe der Fehlermeldung von mount.

Ralf

PS: Wenn du mit KNOPPIX nicht ins Internet kommst, kannst du die Ausgaben auch in eine Datei wegschreiben.
Diese Datei muss dann aber auf einen USB-Stick o.?. gesichert werden.
Auf Wunsch gibt es nur noch Text und keine Bilder mehr in der Signatur.
Keine ? ....... :evil:

Quellcode

1
2
3
4
5
6
7
8
.
    ~
   - -          M
   /V\         - *
  // \\        /V\
 /( _ )\      // \\
  ^~ ~^      /( _ )\
              ^~ ~^

Anonymous

unregistriert

3

07.01.2007, 09:42

Also, ich kann mit Knoppix ins web, sonst w?re ich jetzt nicht hier im Forum.

zu 1 kann ich folgendes posten:

knoppix@1[knoppix]$ fdisk -l
knoppix@1[knoppix]$ cat /etc/fstab
/proc /proc proc defaults 0 0
/sys /sys sysfs noauto 0 0
/dev/pts /dev/pts devpts mode=0622 0 0
/dev/fd0 /media/fd0 auto user,noauto,exec,umask=000 0 0
/dev/cdrom /media/cdrom auto user,noauto,exec,ro 0 0
/dev/hdc /media/hdc auto users,noauto,exec,ro 0 0
# Added by KNOPPIX
/dev/hda1 /media/hda1 ntfs noauto,users,exec,umask=000,uid=knoppix,gid=knoppix 0 0
# Added by KNOPPIX
/dev/hda5 /media/hda5 auto noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hda6 /media/hda6 ntfs noauto,users,exec,umask=000,uid=knoppix,gid=knoppix 0 0
knoppix@1[knoppix]$ dd if=/dev/hda bs=512 count=1 | hexdump -c
dd: ?ffne ?/dev/hda?: Keine Berechtigung
knoppix@1[knoppix]$

auf P 1 kann ich mittlerweile wieder zugreifen (unter Knoppix), den Profilordner konnte ich also retten.

Was Du mit dem 2. Teil meintest, ist mir nicht ganz klar. Ich hoffe, ich poste das richtige. Nach dem ersten dmesg:
knoppix@1[knoppix]$ dmesg
Linux version 2.6.18 (root@Knoppix) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #2 SMP PREEMPT Thu Sep 7 22:52:10 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7df000 (ACPI data)
BIOS-e820: 000000003f7df000 - 000000003f800000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
183MB HIGHMEM available.
832MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 260048
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 208896 pages, LIFO batch:31
HighMem zone: 47056 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f5520
ACPI: RSDT (v001 A M I OEMRSDT 0x07000408 MSFT 0x00000097) @ 0x3f7d0000
ACPI: FADT (v002 A M I OEMFACP 0x07000408 MSFT 0x00000097) @ 0x3f7d0200
ACPI: MADT (v001 A M I OEMAPIC 0x07000408 MSFT 0x00000097) @ 0x3f7d0390
ACPI: OEMB (v001 A M I AMI_OEM 0x07000408 MSFT 0x00000097) @ 0x3f7df040
ACPI: DSDT (v001 1ABHI 1ABHI016 0x00000016 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:c0780000)
Detected 2800.277 MHz processor.
Built 1 zonelists. Total pages: 260048
Kernel command line: ramdisk_size=100000 init=/etc/init lang=de apm=power-off vga=791 initrd=minirt.gz nomce loglevel=0 vmalloc=192M screen=1600x1200 pci=routeirq quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1025776k/1040192k available (2236k kernel code, 13576k reserved, 852k data, 320k init, 188224k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5604.86 BogoMIPS (lpj=11209723)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
Total of 1 processors activated (5604.86 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 853k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
Intel 82802 RNG detected
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 17 (level, low) -> IRQ 20
pnp: 00:06: ioport range 0x1100-0x113f has been reserved
pnp: 00:06: ioport range 0x1254-0x1254 has been reserved
pnp: 00:06: ioport range 0x12d4-0x12d4 has been reserved
pnp: 00:06: ioport range 0x1300-0x1375 has been reserved
pnp: 00:06: ioport range 0x1377-0x137f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: dfd00000-dfdfffff
PREFETCH window: 40000000-400fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1168161521.584:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
vesafb: framebuffer at 0xd0000000, mapped to 0xf4880000, using 3072k, total 8000k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG MP0402H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI DVDRW SDW-042, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v1.1-646.<7>libata version 2.00 loaded.
PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
Time: tsc clocksource has been installed.
VFS: Mounted root (ext2 filesystem).
input: AT Translated Set 2 keyboard as /class/input/input0
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdff7bc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
Synaptics Touchpad, model: 1, fw: 4.1, id: 0x848a1, caps: 0x0/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000df20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000df40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000df80
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usb 2-1: new low speed USB device using uhci_hcd and address 2
Initializing USB Mass Storage driver...
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
NTFS driver 2.1.27 [Flags: R/W MODULE].
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev hda.
FAT: invalid media value (0x00)
VFS: Can't find a valid FAT filesystem on dev hda.
NTFS-fs warning (device hda): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device hda): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hda): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hda): ntfs_fill_super(): Not an NTFS volume.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.05
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 56932 blocks, 65536 bytes/block, largest block is 65562 bytes.
cloop: loaded 512 blocks into cache.
ISO 9660 Extensions: RRIP_1991A
cloop: losetup_file: 37192 blocks, 65536 bytes/block, largest block is 65562 bytes.
cloop: loaded 512 blocks into cache.
ISO 9660 Extensions: RRIP_1991A
aufs 2.6.18rc4-20060904
Freeing unused kernel memory: 320k freed
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
Using specific hotkey driver
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
ACPI: Thermal Zone [THRM] (75 C)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
cpufreq: No nForce2 chipset.
powernow: This module only works with AMD K7 CPUs
usbcore: registered new driver hiddev
input: PS/2+USB Mouse as /class/input/input2
input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
natsemi dp8381x driver, version 2.0, June 27, 2006
originally by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/natsemi.html
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 17 (level, low) -> IRQ 20
natsemi eth0: NatSemi DP8381[56] at 0xdfdff000 (0000:01:0c.0), 00:03:0d:15:ae:97, IRQ 20, port TP.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xd0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ts: Compaq touchscreen protocol output
PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
intel8x0_measure_ac97_clock: measured 59270 usecs
intel8x0: clocking to 48000
NET: Registered protocol family 17
fuse init (API version 7.7)
eth0: remaining active for wake-on-lan
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
[drm] Initialized drm 1.0.1 20051102
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.5.0 20060119 on minor 0
eth0: remaining active for wake-on-lan
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
eth0: no IPv6 routers present
knoppix@1[knoppix]$

Danan ist folgendes passiert:

knoppix@1[knoppix]$ mkdir /tmp/test
knoppix@1[knoppix]$ mount /dev/hda1 /tmp/test
mount: Nur ?root? kann dies tun
knoppix@1[knoppix]$ su
root@1[knoppix]# mount /dev/hda1 /tmp/test
root@1[knoppix]# dmesg
Linux version 2.6.18 (root@Knoppix) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #2 SMP PREEMPT Thu Sep 7 22:52:10 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7df000 (ACPI data)
BIOS-e820: 000000003f7df000 - 000000003f800000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
183MB HIGHMEM available.
832MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 260048
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 208896 pages, LIFO batch:31
HighMem zone: 47056 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f5520
ACPI: RSDT (v001 A M I OEMRSDT 0x07000408 MSFT 0x00000097) @ 0x3f7d0000
ACPI: FADT (v002 A M I OEMFACP 0x07000408 MSFT 0x00000097) @ 0x3f7d0200
ACPI: MADT (v001 A M I OEMAPIC 0x07000408 MSFT 0x00000097) @ 0x3f7d0390
ACPI: OEMB (v001 A M I AMI_OEM 0x07000408 MSFT 0x00000097) @ 0x3f7df040
ACPI: DSDT (v001 1ABHI 1ABHI016 0x00000016 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:c0780000)
Detected 2800.277 MHz processor.
Built 1 zonelists. Total pages: 260048
Kernel command line: ramdisk_size=100000 init=/etc/init lang=de apm=power-off vga=791 initrd=minirt.gz nomce loglevel=0 vmalloc=192M screen=1600x1200 pci=routeirq quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1025776k/1040192k available (2236k kernel code, 13576k reserved, 852k data, 320k init, 188224k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5604.86 BogoMIPS (lpj=11209723)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
Total of 1 processors activated (5604.86 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 853k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
Intel 82802 RNG detected
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 17 (level, low) -> IRQ 20
pnp: 00:06: ioport range 0x1100-0x113f has been reserved
pnp: 00:06: ioport range 0x1254-0x1254 has been reserved
pnp: 00:06: ioport range 0x12d4-0x12d4 has been reserved
pnp: 00:06: ioport range 0x1300-0x1375 has been reserved
pnp: 00:06: ioport range 0x1377-0x137f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: dfd00000-dfdfffff
PREFETCH window: 40000000-400fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1168161521.584:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
vesafb: framebuffer at 0xd0000000, mapped to 0xf4880000, using 3072k, total 8000k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG MP0402H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: QSI DVDRW SDW-042, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v1.1-646.<7>libata version 2.00 loaded.
PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 1
NET: Registered protocol family 15
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
Time: tsc clocksource has been installed.
VFS: Mounted root (ext2 filesystem).
input: AT Translated Set 2 keyboard as /class/input/input0
Failed initialization of WD-7000 SCSI card!
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdff7bc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
Synaptics Touchpad, model: 1, fw: 4.1, id: 0x848a1, caps: 0x0/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000df20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000df40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000df80
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usb 2-1: new low speed USB device using uhci_hcd and address 2
Initializing USB Mass Storage driver...
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
NTFS driver 2.1.27 [Flags: R/W MODULE].
Unable to identify CD-ROM format.
VFS: Can't find an ext2 filesystem on dev hda.
FAT: invalid media value (0x00)
VFS: Can't find a valid FAT filesystem on dev hda.
NTFS-fs warning (device hda): is_boot_sector_ntfs(): Invalid boot sector checksum.
NTFS-fs error (device hda): read_ntfs_boot_sector(): Primary boot sector is invalid.
NTFS-fs error (device hda): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
NTFS-fs error (device hda): ntfs_fill_super(): Not an NTFS volume.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.05
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 56932 blocks, 65536 bytes/block, largest block is 65562 bytes.
cloop: loaded 512 blocks into cache.
ISO 9660 Extensions: RRIP_1991A
cloop: losetup_file: 37192 blocks, 65536 bytes/block, largest block is 65562 bytes.
cloop: loaded 512 blocks into cache.
ISO 9660 Extensions: RRIP_1991A
aufs 2.6.18rc4-20060904
Freeing unused kernel memory: 320k freed
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
Using specific hotkey driver
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
ACPI: Thermal Zone [THRM] (75 C)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
cpufreq: No nForce2 chipset.
powernow: This module only works with AMD K7 CPUs
usbcore: registered new driver hiddev
input: PS/2+USB Mouse as /class/input/input2
input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
natsemi dp8381x driver, version 2.0, June 27, 2006
originally by Donald Becker <becker@scyld.com>
http://www.scyld.com/network/natsemi.html
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 17 (level, low) -> IRQ 20
natsemi eth0: NatSemi DP8381[56] at 0xdfdff000 (0000:01:0c.0), 00:03:0d:15:ae:97, IRQ 20, port TP.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xd0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ts: Compaq touchscreen protocol output
PCI: Enabling device 0000:00:1f.5 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
intel8x0_measure_ac97_clock: measured 59270 usecs
intel8x0: clocking to 48000
NET: Registered protocol family 17
fuse init (API version 7.7)
eth0: remaining active for wake-on-lan
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
[drm] Initialized drm 1.0.1 20051102
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.5.0 20060119 on minor 0
eth0: remaining active for wake-on-lan
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
eth0: no IPv6 routers present
root@1[knoppix]#

Ich hoffe, das sind alle Angaben/Infos, die Du gewollt hast. Wenn nicht, poste nochmal.

Vielen Dank
Michl

Anonymous

unregistriert

4

07.01.2007, 09:49

was mir noch aufgefallen ist:

P 1 ist jetzt ramdisk/temp/test.

Hilft Dir das ???

Bei hda5 ( die 2. partition) kommt folgende Fehlermeldung:

Laufwerk kann nicht eingebunden werden.
Die Fehlermeldung lautet:
mount: konnte Dateisystemtyp nicht feststellen, und es wurde keiner angegeben

P3 (hda6) ist weiterhin /media/hda6


mfg
Michl

Anonymous

unregistriert

5

07.01.2007, 11:41

Meine Daten von P 1&3 konnte ich mittlerweile sichern.

Was aber noch ganz wichtig ist, auf der P 2, die in der Tabelle noch da ist und /media/hda5 hei?t, w?rde ich gerne IRGENDWIE daten retten k?nnen. Dort waren meine Programme abgelegt, einige von denen haben wichtige Daten in den jeweiligen Ordnern gespeichert.

Windows kann ich dann wieder neu installieren, da verlier ich au?er Zeit und meinen Downloads (die muss ich halt nochmal machen) nicht viel.

Danke
Michl

RalfonLinux

Erleuchteter

Beiträge: 2 934

Geschlecht: Männlich

6

08.01.2007, 00:08

Hi,

gib bitte mal in einer Shell ein[code:1]su
fdisk -l
dd if=/dev/hda bs=512 count=1 | hexdump -C[/code:1]

Er erkennt zwar, das du eine P2 hast, aber nicht welches Format.
Ich hatte die Hoffnung, das in den dmesg was drinne steht, aber das war wohl nichts.

Ralf
Auf Wunsch gibt es nur noch Text und keine Bilder mehr in der Signatur.
Keine ? ....... :evil:

Quellcode

1
2
3
4
5
6
7
8
.
    ~
   - -          M
   /V\         - *
  // \\        /V\
 /( _ )\      // \\
  ^~ ~^      /( _ )\
              ^~ ~^

Linux HardwareLinux Computer & PCs | Linux Notebooks & Laptops | Geek Shirts | Geek und Nerd Shirt Shop